JVC AV-27050 User Manual page 26

BUTTON UNCTIONS
MENU
The MENU button allows you to access
the onscreen menu system, Another
complete discussion of these buttons
and the menu system is located on
page 14,
Once you press the menu button, the
CHANNEL -/+ ( ,_,V )
and
VOLUME -/+
( "d • ) buttons work to operate the
menu system,
• Press (AV) to move up and down in
the menu system,
• Press ( ,_• ) to operate a feature in
the menu system,
EXIT
The EXIT button lets you leave the
menu system or turn off PIP when you
press it,
DISPLAY
The onscreen display shows the current
status of timers and inputs.
DISPLAY
07
NOW 12:20 PM
SLEEPTIMER OFF
ON/OFFTIMER EVERYDAY
ON TIME 7:00 PM
OFFTIME 10:00 PM
[] The channel or AV input (Ch, 07)
[] Current time (12:20 PM)
[] Sleep Timer minutes remaining (OFF)
[] On/OFF Timer status (Everyday, on at
7:00 PM, offat 10:00 PM)
Note: Each press of the DISPLAYbutton
changes the display mode:
If you select time or channel, the time
or channel (or vide() input) will remain
on the screen,
VIDEO STATUS
The VInEOSTATUS button lets you select
the "Choice" settings of the Set Video
Status menu, or reset to factory settings,
"Standard" resets the picture settings
to factory standard levels,
"Choice" consists of the settings that
you saved in the Set Vide() Status
menu, page 22,
"Theater" for a film-like look to video,
VIDEO STATUS
CHOICE _TH EATER _STAN DARD
SLEEP TIMER
The Sleep Timer will turn off the TV for
you in case you fail asleep, Program it
to work in intervals of 15 minutes up to
780 minutes,
SLEEP TIMER
O 15 30 45 60 75 90 105 120 135 150 165 180 1
( < (
SLEEP TIMER MESSAGE:
20 seconds prior to the automatic
shut-off, this message will appear:
PUSH SLEEP T IMER B UTR)N
You then have 20 seconds to press the
Sleep Timer button to delay turn off R)r
another 15 minutes.