Playing Back Discs - JVC XL-MC334BKJ Instructions Manual

Compact disc automatic changer
Table of Contents

Advertisement

2. To unload or change discs in other slots, turn the DISC/TRACK
jog dial or press the
number, which is shown as the "DISC" number on the display.
Then press the DISC EJECT button to raise the disc up.
DISC/TRACK
DOWN
UP
Repeat this step to unload or change any additional discs.
3. When unloading or changing is completed, press the OPEN/
CLOSE button to close the door.
The carousel rotates to bring the disc at the loaded/unloaded
position (in the center of the storage area) to the playback
position.

Playing back discs

1 Selecting a playback mode
There are three main playback modes, namely CONTINUE, ONE
DISC, and PROGRAM; each has selective playback functions. (See
the following pages for the description of the playback modes and
functions.)
Select the mode using the PLAY MODE button on the front panel,
or the CONTINUE, ONE DISC, or PROGRAM button on the remote
control.
The current mode is shown on the display.
PLAY MODE
8
/
/
/
buttons to specify the slot
+
10DISC
or
+
–1DISC
–10DISC
1DISC
(Remote control)
CONTINUE ONE DISC PROGRAM
or
(Remote control)
2 Selecting a disc
• Method 1
Press the DISC button, then use the DISC/TRACK jog dial on
the front panel or the numeric buttons to select a disc.
DISC
DISC/TRACK
DOWN
UP
or
The selected disc number is shown on the display.
NOTE: • To specify the disc or track numbers using the nu-
meric buttons, press the corresponding buttons from
higher digits. For example, press "5" then "2" for "52".
Press "1", "4" and then "8" for "148".
• In the operation above, the disc selection mode will
be canceled if you do not use the jog dial or numeric
buttons within 4 seconds after pressing the DISC
button.
Also, the selected disc will be canceled if you do not
execute step 3 or 4 below within 4 seconds after
using the jog dial or numeric buttons.
• Method 2
Use the
/
/
/
buttons on the remote control.
The
(
) button increases (decreases) the disc number by
ten, while the
( ) button increases (decreases) the disc number
one by one.
+
–1DISC
DISC
or
(Remote control)
DISC
TRACK
(Remote control)
10DISC
+
–10DISC
1DISC

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xl-mc334bk

Table of Contents