Playing A Disc; Selecting A Desired Track/Passage; Program Tracks - JVC RD-E221B Instruction Manual

PLAYING A DISC

1. The unit will start playback from track 1 after reading finished. The "
and current track no. would be shown on the display. To interrupt playback, press
the /SCAN/-10/M.- button. The "
playback, press the
2. To stop playback, press the
on the display.

SELECTING A DESIRED TRACK/PASSAGE

To select a desired track
/TUN+/FOLD.+ or
Press the
until the desired track appears on the display. It will start play automatically.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the
track at high speed until desired passage appears, and then release the button. Playback will
start again from this point.
To select a song which track number exceeds 10
To select a song/track which number exceeds 10, press and hold the
/SCAN/-10/M.- button in stop mode.
or
To select a desired folder (for MP3 disc that contains more than one folder)
To select a desired folder during playback, press and hold the
/TUN-/FOLD.- button in stop mode.
or

PROGRAM TRACKS

Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks can be
stored in the memory in any order.
1. In stop mode, press the PROG./P-MODE button, the "PROGRAM" will flash and the "P01"
indicator will be on.
2. Press the CD
to be programmed.
3. Press the PROG./P-MODE button to enter. The display changes to show "P02".
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
/SCAN/-10/M.- button to start playback from the first programmed track.
5. Press the
6. Press the /+10/M.+ button to stop program playback.
To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the /+10/M.+ button when the disc is stopped.
2. Open the CD compartment lid, program will be erased.
REPEAT
To Repeat a Single Track
1. Press the PROG./P-MODE button once in play mode, "REPEAT" will flash on the display.
The current track will be played repeatedly until the
2. To cancel Repeat function, press the PROG./P-MODE button until the "REPEAT" disappear
on the LCD display.
/SCAN/-10/M.- button again.
/+10/M.+ button, the total number of tracks appears
/TUN-/FOLD.- button repeatedly in stop mode or during play
/TUN+/FOLD.+ or
/TUN+/FOLD.+ or
" indicator will flash on the display. To resume
/TUN-/FOLD.- button to scan the current playing
/TUN-/FOLD.- button to select the first desired track
/+10/M.+ button is pressed.
EN
" indicator
/+10/M.+
/TUN+/FOLD.+