Chrome Electric Griddle - Jenn-Air JGCP430ADP Use & Care Manual

Commercial style gas cooktop
Hide thumbs Also See for JGCP430ADP:
Table of Contents

Advertisement

Available languages

Available languages

To Clean:
IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Do not use oven cleaners, bleach
or rust removers.
1. Remove the burner cap and burner head (15,000 and
5,000 Btu/h burners) from the burner base and clean
according to "General Cleaning" section.
2. Clean the gas opening with a damp cloth.
3. Clean clogged burner ports with a straight pin as shown. Do
not enlarge or distort the port. Do not use a wooden
toothpick.
If the burner needs to be adjusted, contact a
trained repair specialist.
[
4. Replace the burner cap, making sure the alignment pins are
properly aligned with the burner cap.
20,000 Btu/h Stacked Power Burner
...........
15,000 Btu/h Burner
A. Incorrect
B. Correct
r-
I
(0o
o )
) o o c,
o01 ..................
B
A. Incorrect
B. Correct
5,000
Btu/h
Simmer/Melt
Burner
5.
A. Incorrect
B. Correct
Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, do not service the
sealed burner yourself. Contact a trained repair specialist.
The
and
To
1.
2.
3.
4.
A
chrome electric griddle system provides an evenly heated
easy to clean cooking surface.
Remove plastic film and clean with hot, soapy water prior to
first use.
To avoid scratching the griddle, do not place any pots or pans
on the griddle.
To avoid scratching the griddle, use only heat resistant plastic
or wooden utensils.
The griddle surface is ready to use, and does not need to be
seasoned.
Pouring cold water on a hot griddle may warp the griddle,
resulting in an uneven cooking surface.
Use:
Position the drip tray under the front edge of the griddle to
catch grease and food residue.
Push in and turn the control knob to desired temperature.
Refer to the griddle Preheat Chart for preheat times.
The griddle light will turn off when the griddle has finished
preheating. The griddle light will turn on and off during use to
indicate that the griddle element is maintaining the selected
surface temperature.
Place food on the griddle and cook to desired doneness.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents