Wiring Diagram - Jenn-Air JXI8036WS Installation Instructions And Use & Care Manual

Replacing a Halogen Lamp
Turn off the range hood and allow the halogen lamp to cool. To
avoid damage or decreasing the life of the new bulb, do not
touch bulb with bare fingers. Replace bulb, using tissue or
wearing cotton gloves to handle bulb.
If new lamps do not operate, make sure the lamps are inserted
correctly before calling service.
1. Disconnect power.
2. Push up on the lens and turn it conterclockwise.
3. Remove the bulb and replace it with a 120-volt, 50-watt
maximum halogen bulb with a GU10 base. Turn it clockwise
to lock it into place.
4. Repeat steps 2-3 for the other bulb if needed.
5. Reconnect power.
WIRING DIAGRAM
GND
Y/G ]_
CON 15
N
Electronic User interface
i BEIEWA CON2
Electronic Power Board
BElCAA
N L NL NM
Pl P2 P4A P3 P4
:TT
BU
BK
__Z
BU
Y
CON 13
CON 14
Y
T_CON 16
CONt
r
'1
I 6
LA S4 S3 S2 Sl
P5 P9 P8 P7 P6
I
I
11CON4
CON7
Y/G
CON 6
CON 5
±
m
12