Controls And Cycle Status; Drying System - IKEA IUD9500WX4 User Instructions

Hide thumbs Also See for IUD9500WX4:
Table of Contents

Advertisement

Available languages

Available languages

OPTIONS
DISH LOAD TYPES
DESCRIPTIONS
USE WITH:
Control Lock
To avoid unintended use of
To turn on Lock, press and hold Heat Dry for at least
Heated
your dishwasher, or cycle
4 seconds.
and option changes during
To turn off Lock, press and hold Heat Dry for at least
Dry
a cycle.
4 seconds.
Anytime
or
When Control Lock is lit all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
3 times. The dishwasher door can be opened while the
Heated
controls are locked.
Dry
Control
Lock
IM PORTANT:
The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the cycle for the
best wash performance.
If the incoming water is less than the recommended
temperature or food soils are heavy, the cycle will
automatically compensate
by adding time, heat and water as needed.
The very first wash cycle after installation in your home will be adjusted to include an additional 2 rinses. This cycle must not be
interrupted for proper sensor adjustment. If this adjustment cycle is canceled or stopped before the Clean light comes on at the end of
the cycle, the next wash cycle will repeat this sensor adjustment.
CONTROL
PURPOSE
COMMENTS
START
To start or resume a
If the door is opened during a cYcle orthe power is interrUpted, the Start/Resume
indicator
-
O
wash cYCle
f!ashes. The CYC! e will not resume unti ! the door is closed and Start/Resume is pressed,
RESUME
To cancel wash
cycle
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
@sanitized
TOfollow the
The Clean indicator glows when a cycle is finished.
@Clean
progress of your
..
.
. :
.
i .
. :
:
:
.....
if you select the San]tEe option, when the SanltEe cycle is finished, the SamtEed indicator glows.
or
Cllsnwasner cycle
If your dishWasher did not pr0perly sanitize your dishes, the light f!ashes at the end 0f the cycle:
Washing
This
can happen if the cyc!e is interrupted, or the wate_ C0U!d not be heated to the required
@ Drying
temperature: The !ight g0es off when Y°U 0Pen and c!0se the door or press CANCELi
Drying System.
:;-,
t,
t I i-_'"
During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat
,_ ....
dries your dishes.
".'. " ;
y,, • ;
IMPORTANT: The vapor is hot. Do not touch the vent during the drying cycle,
f
/

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents