Step By Step Console Operation - LIFESTYLER expance 800 User Manual

DIAGRAM OF THE CONSOLE
Monitor Displays
_.o_o = ii -='_ _/L. "
_ _ TIME OISTA E
: _ - _.X.F*T
_-- _ HEART RATE TRAINING ZONES SPEED CALS, / FAT C/d.S. POWER INCLINE
-- i " PULSE
\ Po, o ,oo, oo
Speed Control Clip'_ l_'--WJ-II I _ Key Sensor Control
8
BATI'ERY INSTALLATION
The console requires three "AA" batteries (not in-
cluded). Alkaline batteries are recommended.
To install batteries, open the battery cover under the
console as shown below. Press three batteries into the
battery com-
parlment,
Make sure
that the neg-
ative (-)
ends of the
batteries are
touching the
spdngs.
Close the
battery cover.
STEP BY STEP CONSOLE OPERATION
Before operating the console, make sure that the power
cord is properly plugged in. (See HOW TO PLUG IN
THE POWER CORD on page 7.) If there is a thin sheet
of clear plastic on the face of the console, remove it.
Next, step onto the foot rails of the treadmill. Find the
clip attached to the key (see the drawing above), and
slide the clip onto the waistband of your clothing.
Follow the steps on page 9 to operate the console.