Before The Assembly - Hamilton Beach OG02 Assembly & Operation Manual

BEFORE THE ASSEMBLY
READ AND FOLLOW THE iNSTRUCTiONS BELOW TO CORRECTLY UNPACK
GRILL PARTS FROM SHiPPiNG BOX.
STEP1"
1. Open shipping box by slicing down its edges with a box cutter. Take out the four legs and
bottom shelf. Next, remove the door bracket, grease cup, and grease cup clip. Take two
doors and two side panels out of protective Styrofoam, as shown in Fig. A, but leave grill
head in Styrofoam until Step 2. Remove all parts from plastic bags.
Manual
- Legs
Bottom Shelf
Back Panel
Door Bracket Left and Right Doors
Left and
Right PaneJs
Grease Cup and
Grease Cup Clip
Grill Head
Fig. A
9