ASSEMBLY
READ AND FOLLOW THE INSTRUCTIONS BELOW TO CORRECTLY UNPACK GRILL PARTS
FROM SHIPPING BOX.
Step 1: Open shipping box by slicing down its edges with a box cutter. Take out the four legs and bottom
shelf. Next remove the door bracket, grease cup and grease cup clip. Take two doors and two side
panels out of protective styrofoam as shown in Fig.A, but leave grill head in styrofoam until Step 2.
Remove all parts from plastic bags.
Styrofoam
BEFORE THE ASSEMBLY
Cardboard
Styrofoam
Cardboard
Back Panel
Door Bracket
Grill Head
Fig.A
Manual
Legs
Bottom Shelf
Doors
Styrofoam
Grease Cup&Grease Cup Clip
Styrofoam
Cardboard
Panels
5