Haier XQB60-91AF User Manual page 24

XQB60-91AF MANUAL 10/22/01 11:39 AM _,_ge 24
Unpackin 9 Your
Appliance
• Remove allpacking materials. This includesthe foam base and alladhesive tape
holding the washer accessoriesinsideand outside.Slideout and remove bottom
styrofoam thatisused to secure the washer from shipping damage due to vibra-
tionand shock,
• inspect and remove any remains of packing, tape or printed materials before
using the washer.
[eveMin 9 Your Washer
• Your washer has 4 leveling legs; which are located on the four bottom corners.
After properly placing your washer in its final position, you can level your washen
• Leveling legs can be adjusted by turning them counterclockwise to raise your
washer or turning them clockwise to lower your washer.
Balance
Display
{[÷veHn 9 indicator}
The "Balance Display" is located at the left upper top corner of the washer,
This display shows if the washer is leveled properly.
• If the washer is leveled properly, the "Air Bubble" will be at the center,
• If the washer is not leveled properly, you will see that "Air Bubble" is either at left,
right, front or back. You may need to find the flat hard surface to put the washer
on and need to level the legs to balance it.
23