Troubleshooting Tips - Hotpoint RA720 Owner's Manual And Installation Instructions

Before YouCall ForService...
TrOubleshooting -tips
Save time and money! Review the chart on this page
t and you may not need to call for service.
Problem Possible Causes What To Do
Surface un#s not The surface milts are * _._]th tile controls off, check to make sure tile surtil('e
functioning properly not plugged hasolidly, unit is plugged completely into tile receptacle.
The surface refit controls * Check to see the correct control is set fl)r the stmfi_ce
improperly set. unit xou are usin,
The drip pans are not set • _]th tile controls off, check to make sure tile drip
securely in the cooktop,
pan is in tile recess
in tile cooktop
and that tile
opening in tile pan lines up with tile receptacle.
Oven will
A fuse in your home may
• Replace tile fllse or reset tile drcuit
breaker.
not Work be blown or the circuit
breaker tripped.
Plug on range is not • Make sure electrical plug is plugged into a live, properly
completely inserted in grounded outlet.
the electrical outlet.
Oven control
• See tile Using the oven sections.
improperly set.
Food does not Oven control * Make stu'e veil ttlrn tile knob all tile way to tile
broilproperly
hnproperly set.
BROIL position.
Improper shelf position • See tile Broiling Guide.
being used.
Cookware not suited * Use tile broiling pan and grid that came with your range.
for broiling.
Aluminum foil used on the * See tile Use
of aluminum foil
section.
the broiling pan and grid has
not been fitted properly and
slit as recommended.
Food does not bake Oven control * See tile Using the oven for baking or roasting section.
or roast properly improperly set.
Shelf position is incorrect
* See tile Using the oven for baking or roasting section.
or the shelf is not level.
Necessary preheating * See the Using the oven for baking or roasting section.
was not done.
• See tile Using the oven forbaking orroasting section.
Incorrect cookwaxe or
cookwaace of improper
size being used.
2O