Advertisement
WHERE
TO BUY
BAGS
Bags may be purchased
from your local Authorized
Hoover
Dealer, or
from
Hoover
Factory
Branch Service
Centers
listed on the white insert.
WHEN
ORDERING
BAGS
BE SURE
TO
MENTION
THE
MODEL
OF
YOUR
CLEANER.
This is located on the bottom side of the main
casting at the opening where the cleaning tool converter is inserted.
REPLACING THE HEADLIGHT*
Disconnect
the Cleaner
From Electrical
Outlet
1. Set nozzle adjustment to the Normal
or High position
2. Turn cleaner
over and remove the two
screws
indicated
in the illustration.
Place
cleaner
in the upright
position.
Slip furni-
ture guard and hood up off of cleaner
casting.
3. Take off hood and remove
bulb by
pressing
in and turning in a counter-
clockwise
direction.
4. Replace with same wattage
bulb by
pressing
in and turning in a clockwise
direction.
5. Replace
hood.
Position
furniture
guard
onto casting of cleaner. Tighten
screws.
THE BELT
The belt of your Hoover cleaner
controls
the speed of the rug agitator and is impor-
tant for
the efficient
operation
of your
cleaner.
Because of this, it is important
when buying
a new belt that you always
insist on a genuine
Hoover belt. Some
other
belts on the market, not manufac-
tured
under Hoover design and quality
controls,
do not operate
the agitator
correctly
and create undue stress which
will damage
your
Hoover cleaner.
Genuine
Hoover
belts have the word
HOOVER
embossed
on the belt.
10
*Available
on some models.
Advertisement
