Advertisement
Selecting The Proper Carpet Adjustment
LOW POSITION-- Select the LOW position
for
cleaning
low pile
and kitchen
carpeting.
Notice
that the nozzle
of the cleaner
is flush
with the
carpet.
NORMAL
POSITION
-- Select
the
NORMAL
position
for
carpeting
of normal
pile height.
Use
the
NORMAL
position
when
removing
loose
dirt from
hard surface
floors.
HIGH
POSITION
-- If cleaner
is hard to push
on the
NORMAL
position,
select
the
HIGH
position.
Use the
HIGH position
for
very
thick
pile carpeting.
SHAG
POSITION
-- Select
the SHAG
position
for
cleaning very long or shag pile carpet.
NOTE:
The LOW position
lowers
the nozzle to the carpet for
effective
cleaning
of LOW carpeting.
Be sure to change
the nozzle
adjustment
when cleaning
other types of carpeting.
If the LOW position
is used
when cleaning
normal, high or shag pile carpet, there is an increase in
the belt load and pushing effort is greatly
increased.
EDGE
CLEANING
FEATURE
This feature
provides for
improved
cleaning
of carpet edges near base-
boards and solid furniture.
Passages have been added to the sides of the
cleaner
bottom
plate to increase
air flow
carrying
dust from
the carpet
edge to the nozzle. From the right or left side, slowly guide the cleaner
parallel to the edge of the carpet.
CLEANING
LIGHTWEIGHT
FLEXIBLE
RUGS
Stand on one end of the rug and move cleaner toward
other end. Before
reaching
the other end, push down on the handle.
This will lift up the
nozzle
(front of cleaner)
and will prevent
the rug from
clinging
to the
cleaner.
Continue
to lift up the nozzle of the cleaner
when you have
reached the end. Push down on the handle
until the cleaner is complete-
ly off the rug. Move the cleaner back to start again and lower the
nozzle,
using only forward
strokes.
Advertisement
