Table of Contents
Advertisement
How
to €Jean
tooJs
To clean the hose, wipe off dirt with a
cloth dampened
in a mild detergent.
Rinse with a damp cloth,
Cleaning tools may be washed in warm
water with a detergent. Rinse and air dry
before using,
Familiarize yourself with these home
maintenance
tasks as proper use and
care of your cleaner will ensure contin-
ued cleaning effectiveness.
Dirt cup
The dirt cup assembly consists of the
following parts:
Lid (A)
Dirt cup (B)
Pre-filter (C)
HEPA cartridge filter (D)
Dirt inlet opening (E)
While the cleaner is in operation, the pr÷-
filter screen will stop larger debris from
entering the HEPA cartridge filter chamber.
This larger debris will be seen collecting in
the left side of the dirt cup, The HEPA car=
tridge filter will collect fine particles that
have passed through the pre-filter screen.
When
to e_pty
It is recommended
that the dirt cup be
emptied before the dirt reaches the dirt
inlet opening on back of dirt cup (Fig. 3=
1) or after every use if preferred.
CAUTION:
Very fine materials,
such
as face powder or cornstarch,
may
seal the filter and cause loss of suc-
tion. When using the cleaner for this
type of dust, empty the cup and clean
the filters
often.
How
to e_pt:y
Turn cleaner
off and ailow motor to
stop completely.
Disconnect
cleaner from emectrical
outlet.
Do not use the cleaner without
dirt cup or filters
in place.
Press dirt cup latch (F) and remove dirt
cup,
|
,
,,\ ,
Remove lid.
Note: It is not necessary to remove the
HEPA cartridge filter to empty the dirt
cup=
Tap side of cup until no more dust parti-
cles fall from the HEPA cartridge
filter.
Replace dirt cup lid=
Place bottom of cup into cleaner= Pivot
cup and snap into place.
Bottom of cup will rest behind grooves at
bottom of cleaner cavity (G)=
Press latch down.
Continued
_
7
Hide quick links:
Advertisement
Table of Contents
