Advertisement
• While the on-screen display system, EasyMenu _],
is not on display, press the
remote controller SELECT button <:3 or [> to adjust the contrast,
• When you press these buttons,
the status of
contrast
adjustment
and the input horizontal
(H) and vertical
(V) frequencies
of the input
signal will be displayed
in a guidance
image.
• While the guidance
is on display,
press the <3
key to narrow
the difference
between
darkness
and brightness.
• While the guidance
is on display,
press the [:>
key to widen
the difference
between
darkness
and brightness.
• You can also adjust the contrast
setting via the
on-screen
display
system,
EasyMenu
• The contrast
adjustment
mode will exit when
no keys are emered
for 5 seconds.
(The
adjustment
status guidance
will disappear
automatically.)
Remote
controller
+¢ o
VIDEO
CONTRAST : 100
Contrast setting
RGB
CONTRAST
: 100
4_!_+
Input ve_rtical
frequency
frequency
Adjustment
status guidance
•
Press
the remote
controller
RECALL
button
to
display
the status
of input
signals
on the screen.
•
Press
the remote
controller
RECALL
button
Remote
once
again
to exit the screen
display,
controller
REC/4C
F_7
• The EasyMenu
will clear 5 seconds
later.
VIDEO
VIDEO2
[COMPONEN"q
•
Input terminal
name
RGB
RGB1
[D SLIB]
i
H : 46 5kHz,
V : 60 0Hz
i
Input horizontal
Input vertical
frequency
frequency
11
Advertisement
