Advertisement
Loading
Batteries
1) Open the battery
cover.
• Slide the battery
cover towards
the arrow
mark while
pressing
it.
2) Load batteries.
• Load two Size AA batteries
included
observing
the
correct
polarities.
3) Close the battery cover.
• Slide back the battery cover towards the an-ow mark.
Handling
the Remote
Controller
• Use the remote
controller
within about
5 m from front of the
unit's
remote-control
sensor and within 30 degrees
on both
sides.
About 5m
CAUTIONS
TIPS
• Do not use new and old batteries
together.
The batteries
could
explode
or leak, resulting
in fires, physical
iniury,
or stains.
• When loading
batteries,
observe
their correct
polarities
as marked
on
the product,
if loaded in the wrong direction,
the batteries
could
explode
or leak, resulting
in fires, physical
injury,
or stains.
• Do not drop or impact the remote
controller.
• Do not splash
the remote
controller
with water or put it on a wet
object
to avoid possible
failures.
• Before
leaving
the remote
controller
out of use for an extended
period
of time, remove
the batteries
from it.
• If the remote
controller
begins
to lack responsiveness,
replace
the
batteries.
• Strong
light such as direct sunlight
impinging
on the photoreceptor
of the remote
control
can cause operational
t_ailure. Position
this unit
to avoid direct contact
with such light.
Advertisement
