Table of Contents
Advertisement
• SOUND
SEI-I-ING
Use the sound
settings
to improve
the sound
performance
of your TV depending
on listening
conditions.
Press MENU, 3, ENTER, 2, ENTER to display the SOUND SETTING.
- SOUND SETTING -
1 MTS MODE : STEREO
2 L_SS
:OFF
3 NT. SPEAKERS: 0FF
4 SURROUND:OFF
PRESS ENTERTO SET
Use the CURSOR ,&, • to select a function.
Press ENTER to set a function or to turn it on or off.
• MTS MODE (Multi-Channel Television Sound) will allow you to select STEREO (a stereo broadcast), SA (second
audio) program which may be a secondary language, weather report, etc. or MONO (monaural sound) used when
receiving a weak stereo broadcast.
The sources received will be displayed below the channel number. The source you select will be displayed to the left
of the channel number. See example below for each selection when both stereo and second audio are received
(monaural is always received).
STEREO selected
I NEWS
STEREO
31
STFJ_
SA selected
MONO selected
NEWS
• LOUDNESS
This function will improve the quality of both low and high frequency sounds when listening at low volume levels.
• INT. SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use only speakers from a separate
stereo system.
• SURROUND SOUND STEREO
Surround sound allows the viewer to enjoy sound which provides a feeling of "presence" from stereo broadcasts and
VCR tapes* recorded with stereo sound.
*Your VCR player must be a Hi-Fi or stereo unit. See page 27 for stereo VCR connection.
*Set must be outputting stereo. (See MTS • mode : stereo (above).)
23
Advertisement
Table of Contents
