Resources Controlled By; Irq Resources; Pci/Vga Palette Snoop - EVGA nForce 780i SLI FTW User Manual

Set this to
caused a serious conflict that prevents the OS from booting. The default setting is
[Disabled]

Resources Controlled By

This function on the PnP/PCI Configuration menu allows you to define if the BIOS can
automatically configure all the boot and plug-and-play compatible devices or if you can
manually select IRQ, DMA, and memory base address fields. Select
want the BIOS to automatically populate these fields. If you select
assign the resources,
x IRQ Resources

IRQ Resources

To enable this field for input, set
field enabled, press
Use Legacy ISA for devices compliant with the original PC AT Bus specification. Use
PCI/ISA PnP for devices compliant with the plug-and-play standard, whether designed for
PCI or ISA Bus architecture.

PCI/VGA Palette Snoop

This function on the PnP/PCI Configuration menu allows you to enable or disable the
Palette Snoop function.
46
EVGA
[Enabled]
if you have installed a new add-on and the system reconfiguration has
.
IRQ Resources
Resources Controlled By
Resources Controlled By
IRQ Resources
to see options.
Enter
IRQ-5 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
is enabled for input.
[Auto(ESCD)]
Press Enter
[Manual)]
[Press Enter]
Resources Controlled By
[PCI Device]
[Reserved]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[Auto(ESCD)]
if you
[Manual]
so you can
[Manual]
to . With this