Fsb & Memory Clock Mode; Fsb (Qdr), Mhz; Mem (Ddr), Mhz - EVGA nForce 780i SLI FTW User Manual

When you select one of the
Unlinked
note when enabling SLI –Ready memory, timings and voltages will change automatically
based on selection.
FSB and Memory Clock Mode

Use the
Mode options. The options are:

FSB (QDR), MHz


new value. Note that the
effect on a reboot.

MEM (DDR), MHz


Use the
new value. Note that the
effect when the system reboots.
54
EVGA
and cannot be changed until
and
Page Up Page Down
Auto

This is the optimal setting since it sets the FSB and memory speeds automatically.
Linked

When Link is selected,
can be entered manually. As the FSB speed is changed,
proportionally.
CPU Freq, MHz
CPU Multiplier
FSB – Memory Clock Mode
FSB (QDR), MHz
Actual FSB (QDR), MHz
x MEM (DDR), MHz
Actual MEM (DDR), MHz
Unlinked

When Unlink is selected,
editable and the FSB and memory speeds can be entered manually. As the FSB speed
CPU Freq, MHz
is changed,
FSB – Memory Clock Mode
FSB (QDR), MHz
Actual FSB (QDR), MHz
MEM (DDR), MHz
Actual MEM (DDR), MHz
Use the or keys to scroll through new values for the CPU FSB frequency or type in a
+ –
or keys to scroll through new values for the memory frequency or type in a
+ –
CPUOC x%
options, the
SLI-Ready Memory
keys to scroll through the FSB and Memory Clock
FSB (QDR), MHz
2933.3
11X
[Linked]
[1067]
1066.7
Auto
800.0
FSB (QDR), MHz
changes proportionally.
[Linked]
[1067]
1066.7
[1067]
800.0
Actual FSB (QDR)
Actual MEM (DDR)
FSB - Memory Clock Mode
Disable
is set to
is changed to editable and the FSB speed
CPU Freq, MHz
2933.3
11X
1066.7
800.6
MEM (DDR), MHz
and
1066.7
800.6
reflects the actual frequency that takes
reflects the actual frequency that takes
is set to
. Please
changes
are changed to