Reset Configuration; Resources Controlled By; Irq Resources - EVGA X58 SLI3 User Manual

Reset Configuration

This function on the PnP/PCI Configuration menu allows you to enable or
disable the resetting of Extended System Configuration Data (ESCD) when you
exit Setup. Set this to [Enabled] if you have installed a new add-on and the
system reconfiguration has caused a serious conflict that prevents the OS from
booting. The default setting is [Disabled].

Resources Controlled By

This function on the PnP/PCI Configuration menu allows you to define if the
BIOS can automatically configure all the boot and plug-and-play compatible
devices or if you can manually select IRQ, DMA, and memory base address
fields. Select
these fields. If you select
Resources
Resources Controlled By
x IRQ Resources
Resources Controlled By

IRQ Resources

IRQ Resources
To enable this field for input, set
[Manual]
IRQ-5
IRQ-9
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
[Auto(ESCD)]
[Manual]
is enabled for input.
. With this field enabled, press
assigned to
assigned to
if you want the BIOS to automatically populate
so you can assign the resources,
[Auto(ESCD)]
Press Enter
[Manual)]
[Press Enter]
Resources Controlled By
to see options.
Enter
[PCI Device]
[Reserved]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
IRQ
to