MAC Config
Press
to display the MAC Config menu.
Enter
MAC0 LAN
MAC1 LAN
MACx LAN
Use these functions to set the MAC0 and/or MAC1 LANs to
functions.
IEEE1394 controller
This function on the Integrated Peripherals menu allows you to enable or disable the
IEEE1394 (Firewire) interface.
HD Audio
This function on the Integrated Peripherals menu allows you to enable or disable the
integrated high definition audio.
IDE HDD Block Mode
Using this function on the Integrated Peripherals menu allows your IDE hard drive needs to
support block mode. Select
read/writes per sector the drive can support. Select
support block mode.
Onboard FDC Controller
This function on the Integrated Peripherals menu allows you to enable or disable the onboard
Floppy Disk Controller function.
Onboard Serial Port 1
This function on the Integrated Peripherals menu allows you to select the onboard serial port
1 function. Options are
[Disabled].
[Enabled]
[Disabled]
[Enabled]
to automatically detect the optimal number of block
[3F8/IRQ4]
2E8/IRQ3]
,
Auto
or disable their
[Disabled]
if your drive does not
[3E8/IRQ4]
[Auto]
,
,
, and
41
EVGA