Fan Connections - EVGA nForce 780i SLI FTW User Manual

Fan Connections

There are five fan connections on the motherboard. The fan speed can be detected and
viewed in the
off after the system enters S3, S4 and S5 mode.
Note that the CPU fan cable can
be either a 3-pin or a 4-pin
connector. Connect a 3-pin
connector to pins 1, 2, and 3 on
the motherboard connector.
20
EVGA
section of the CMOS Setup. The fans are automatically turned
PC Health Status
CPU Fan Connector
4 3 2
1
GND SENSE
PWR CONTROL
Install the fan over the nForce 780i SLI SPP
to draw heat from the MCP. The fan plugs
into a 3-pin connector.
EVGA nForce 780i SLI SPP/MCP fan connector
Fan Connector
3
1
GND
+12V
2
SENSE