GE PGSS5PJXASS Owner's Manual And Installation Instructions page 20

instatlation Instructions
INSTALLING THE REFRIGERATOR
(cont.)
[] REMOVE THE FRESH FOOD
DOOR HANDLE
(For placement in the installation location or
reversal of the handles - on some models)
Stainless steel (on some models):
Q REHOVING THE
DOORHANDLE:
Loosenthe set
screws with the
3/32" Allen wrench
and remove the
handle. NOTE:For
Double Door models,
follow the same
procedure on the
opposite door.
Badge
Mounting
Fasteners
(appearance mag varg)
Plastic handle (on some models):
I_ REMOVING THEDOORHANDLE: D epressthe tab on
Q
the underside of the handle and slide the handle up
and off of the mounting fasteners.
REVERSING T HE
DOORHANDLE
(on some models):
• Removethe
handle mounting
fasteners with a
1/4" Allen wrench
and transfer the
handle mounting
fasteners to the
right side.
Haunting
• Removethe
Fasteners
logo badge.
• Removeand (appearance magvarg)
transfer the plug
button to the left
side of the fresh food door, NOTE:Use a flat plastic
edgeto preventdamaging
the door.Remove ang
adhesive on the door with a mild detergent, Remove
the paper covering on the adhesive backing on the
logo badge prior to carefullg attaching the badge to
the door.
Badge
[] REMOVE THE TOP AND BOTTOM
FREEZER DRAWER HANDLES
Stainless steel and plastic handles:
O Loosenthe set screws located on the underside of
the handle with the 1/8" Allen wrench and remove
the handle.
NOTE:If the handle mounting fasteners need to be
tightened or removed, use a 1/4" Allen wrench.
@
2O