Advertisement
Available languages
Available languages
Installation
Instructions
Refrigerator
Models 21 and 25
Double Freezer Drawers
I
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website
at: ge.com
In Canada, call 1.800.561.3344
or Visit our Website
at: www.geappliances.ca
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• INPORTANT - Save these instructions
for l ocal
inspector's use.
•
IMPORTANT
- Observe all governing codes and
ordinances.
• Note to Installer- Be sure to leave these instructions with
the Consumer.
• Note to Consumer- Keep these instructions for future
reference.
• Skill level - Installation of this appliance requiresbasic
mechanical skills.
• Completion time- Refrigerator Installation
20 minutes
Water Line Installation
30 minutes
Anti-Tip Bracket Installation
20 minutes
• Proper installation is the responsibilitUof the installer.
• Product failure due to improper installation is not covered
under the Warrantg,
PREPARATION
MOVING THE REFRIGERATOR INDOORS
If the refrigerator will not fit through a doorwag, the
refrigerator door and freezer drawer can be removed.
• To remove the refrigerator door,see Step 1 in the
Reversingthe Door Swing section.
• To remove the freezer drawer, see the Removingthe
FreezerDrawer section.
WATER SUPPLY TO THE ICEMAKER AND DISPENSER
(ON SOME MODELS)
If the refrigerator has an icemaker, it will have to be
connected to a cold water line.A GEwater supply kit
(containing tubing, shutoff valve,fittings and instructions)
is available at extra cost from your dealer,bg visiting our
Website at ge.com (in Canada at www.geappliances.ca)
or from Parts and Accessories,800.626.2002(In Canada
1,888,261,3055),
I
MATERIALS YOU MAY NEED
(not included)
Lag Bolts
Drill Bit Appropriate
for Anchors
Anchor
Sleeves
For Anti-Tip Bracket Mounted on CONCRETEFloors
Onlu
TOOLS YOU MAY NEED
Adjustable Wrench
3/8" and 5/16" Socket
Ratchet/Driver
i/4"Outer Diameter
Compression
Nut
and Ferrule {sleeve)
(icemaker
models only)
Phillips Head Screwdriver
3/32", 1/8" and 1/4" Allen
wrenches
1/8" Drill Bit and
Electric or Hand Drill
Tapemeasure
J
,,})Y)
Pencil
Wire Cutters
1/4" Nut Driver
Level
15
Advertisement
