Installation Instructions - GE JGP321 Owner's Manual And Installation Instructions

Installation
Instructions
30" Gas Cooktop
I
If you have questions, call 1.800.GE.CARES or visit
our
Website at:ge.com
In the Commonwealth of Massachusetts:
• This product must be installed by a
licensed plumber or gas fitter.
• When using ball-type gas shut-off valves,
they shall be the T-handle type.
A flexible gas connector, when used,
must not exceed 3 feet.
I
CAUTION: Before you begin--read these
instructions completely and carefully.
• IMPORTANT--Save these instructions for
local inspector's use.
• IMPORTANT--OBSERVE ALL GOVERNING
CODES AND ORDINANCES.
• Note to Installer--Be sure to leave these
instructions with the Consumer.
• Note to Consumer--Keep these instructions
for future reference.
• Note--This appliance must be properly
grounded.
• IMPORTANT: Leak testing of the appliance
shall be conducted according to the
manufacturer's instructions.
• Skill level--Installation of this appliance
requires basic mechanical skills.
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
MATERIALS YOU MAY NEED
%%
4 screws
Pipe Fittings
Joint Sealant Shut Off
Valves
TOOLS YOU WILL NEED
Adjustable Wrench
or Open End Wrench
1/8" Drill Bit & Phillips
Electric or Head
Hand Drill Screwdriver
Flat-Blade Screwdriver
Pencil
Pipe Wrench
Ruler or
Straightedge
Saber Saw
12