Installation Instructions - GE JP328BK-BB Owner's Manual & Installation Instructions

Installation
Instructions
"If you have questions, call 800.GE.CARES or visit our website at: GEAppliances.com"
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
IMPORTANT
•
for local inspector's use.
IMPORTANT
•
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Product failure due to improper installation is
not covered under the Warranty.
WARNING
•
properly grounded.
ATTENTION INSTALLER
•
COOKTOPS MUST BE HARD WIRED (DIRECT
WIRED) INTO AN APPROVED JUNCTION BOX. A
"PLUG AND RECEPTACLE" IS NOT PERMITTED
ON THESE PRODUCTS.
• Skill level - Installation of this appliance
requires a qualified installer or electrician.
• Proper installation is the responsibility
of the installer and product failure due to
improper installation is NOT covered under
warranty.
PARTS INCLUDED
(WB1X1137)
49-80759
Save these instructions
Observe all governing
This appliance must be
ALL
4 Screws
Electric Cooktop
JP328
MATERIALS YOU WILL NEED
Junction Box
TOOLS YOU WILL NEED
Pencil
Phillips and Flat Head
Screwdriver
Ruler or Straightedge
Safety Glasses
FOR TILE COUNTERTOP INSTALLATION
• Electric drill and 5/32" drill bit
• 4 / " x 1
3
16
This cooktop cannot be installed in countertops
that cannot accept screws, such as granite or
marble.
Wire Nuts
Saber Saw
1/8" Drill Bit & Electric or
Hand Drill
/ " masonry screws
1
4
9