GE JGP321 Owner's Manual And Installation Instructions page 16

Installation Instructions
PREPARING H
[_ he following MINIMUM clearance
dimensions must be maintained.
13" MAX. Depth
of unprotected
overhead
3 3/4 MIN.
clearance from
wall on the right
of the unit
30" MIN.
clearance from I
countertop to I ,18" MIN.
height from
unprotected I countertop to
overhead surface nearest cabinet on
either side of unit
3 3/4" MIN.
clearance from
cutout to side
wall on the left
of the unit
Overall cooktop dimensions
_.._ 3 9/16"
Cutout dimensions
of the countertop
ITo insure accuracy, it is best to make_
a template when cutting the opening III
in the counter.
1 3t4" Min/.
Between cutout
and the wall behind
the cooktop
3 114" Min.
from front edge
of cutout
and front edge
of countertop
19 5/8" width of cut
OP NING
The recommended Gas Supply
Location from the backwall.
Recommended
gas supply
location.
1" Min, From Backwall
12 1/2i_ O
/_ From Cutout
Center Line
_] Make sure the wall coverings,
countertop and cabinets around the
cooktop can withstand heat (up to
200°F) generated by cooktop.
16