Troubleshooting Tips - GE JGP321 Owner's Manual And Installation Instructions

Before you call for service.., ge.com
TrOubleshooting -tips
Save time and money! Review the chart on this page
t and you may not need to call for service.
Problem Possible Causes What To Do
Burners do not light Plug
on rmlge is not * On models with electric
ignition,
inake sure electrical
completely inserted in plug is i)lugged into a live, i)rol)erl) ' grounded outlet,
the electrical outlet.
Bunaer holes on the side
* Remove
the burnels and clean them with a safety pin
or around the top of the or paper clip. Make sure you do not enlarge the holes.
burner may be clogged.
Burners may not be fitted * ]_elnove the burners and reinstall theln i_roperly.
correctly onto the mounting
brackets.
Burners have yellow or
yellow-tipped flames
The combustion quality of
burner flaanes needs to be
determhled visually.
• Use the illustrations below to detet_nine if your 1)urner
flalnes are noi_/nal. If burner flaules look li]¢e A, call fitr
service. Normal 1)urner flalnes should look like B or C,
del_ending on the type of gas you use. _]th I,P gas, some
yellow tipping on outer cones is noi_nal.
A-Yellow flames B-Yellow tips C-Soft blue flames
Carlfor servic e on outercones Normal for
Normal for LP gas natural gas
25