Install The Cooktop - GE JGP990 Installation & Owner's Instructions

Installation Instructions
INSTALL THE COOKTOP
[] PREPARE THE COOKTOP
Remoxe the xent grille, vent filter, sealed burner
module and the tape from the burner caps,
Turn the cooktop o',er (upside down) and gently
place it on the stwofoam I)ackin_"
Unscrew (loosen) the side hold-down screws,
Usestyrofoaro Loosenside heN-
to protectcooktop downscrews
Install the plenum to the cooktop using 4 screws,
The motor opening on the box goes toward
the lett side of the unit (the side with the grease
.jar lid).
'
[] PREPARE THE COOKTOP (cont.)
Rotate the cooktop and plenum fi)rward and
careflfllv set it on its back edge on the stvrofl_am
packing.
Install the blower assembly onto the plenum so
that the blower exhaust is pointing down or back
as needed. Push the bolts through the bolt holes
in the plenum.
For hack exhaust,
position blower
outlet in direction
of this arrow
For down exhaust,
position blower
outlet in direction
of this arrow
From the vent opening in the top of the
cooktop, install the vent guard over the bolts.
Use the 4 ntlts to secure the blower assembly
and vent guard to the inside of the plenum.
4 Nuts
13/8" socket
required)
Vent guard
26