Tips - GE JGP990 Installation & Owner's Instructions

Before you call for service...
Troubleshooting -tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Burnersdo notlight
Possible Causes
Plug on cooktop is not
completely inserted in the
electrical outlet.
What To Do
• Make sure electrical I_lug, is I_lugged,, into a li_e, properly
grounded outlet,
Gas supply not comlected
• See the Installation Instructions section,
or turned on,
A fuse in your home may be
• Replace the filse or reset the circuit
breaker,
blown or the circuit breaker
tripped.
Igniter orifice in burner body • Remove the obstruction.
may be clogged.
Burner pm'ts not replaced • See Sealed Btu'ner Modules in the Care and cleaning
correctly, of the cooktop section.
Hole in burner top behind • Use a small sewing needle to mq_lug.
the igniter may be clogged.
Burnershaveyellow or
yellow-tippedflamesor
flameslift offtheport
The combustion quality
of burner flmnes needs
to be determined visually,
A-Yellow flames
Callfor service
Burner parts not replaced
correctly.
B-Yellow tips on C-Soft blue flames
outer cones Normal for natural
Normal for LP gas gas
• If bm'ner flame looks like A, call fin" service. NoHnal
burner flames should look like B or C, depending on
the type of gas.
NOTE:The grill btu'ner will show orange flames from
grease drippings.
• See Care and cleaning of the cooktop section.
34