Lp Conversion Instructions; Gas Cooktop; For Your Safety - GE JGP990 Installation & Owner's Instructions

LP Conversion
Instructions
Gas Cooktop
Questions?Call 800.GE. C ARES(800.432.2737) or Visit,,,,-_ ebsite :it: ge.com
BEFORE YOU BEGIN
Read these instructions completely and carefully.
• IMPORTANT - S_,,e t hese
instI uctions for local inspector's use.
• IMPORTANT
- Obsei.e _ ,ll
governing codes and ordinances.
• Note to Installer
-
Be sure
to leave these
instiuctions with the Consumer.
• Note to Consumer - KeeI)
these
instIuctions tot flmn'e reference.
• This cooktop is fi_ctory set fl)r natural gas operation.
Conversion to I,P operation should be performed by
a qualified technician or installer. Keep these
instructions for flmue refi_rence. When converting
to I,P, save the original parts for possible flmn'e use.
• Product failure due to improper installation is not
covered under the GE Appliance Warranty.
FOR YOUR SAFETY:
WARNING - _f,,,. ; ,ie ,isin,, iP
(bottled)
gas, all a(!iustments described in the fiillowing steps must
(/ o" " " " be made bef re attemi)tin_, btunei adlustments, or use of
the cooktop.
WARNING
- This comersion kit shall be
installed by a qualified service agen W in accordance
with the manufi_cturer's instructions and all applicable
codes and requirements of the authority having
jurisdiction. If the intimnation in these insti uctions is
not followed exactly; a fire, explosion or production
of carbon monoxide may result, causing property
damage, personal
injury or
loss of life. The qualified
service agency is responsible for the proper installation
of this kit. The installation is not proper and complete
until the operation of the converted appliance is
checked as spedfied in the inanufilcturer's instiuctions
supplied with the kit.
TOOLS YOU WILL NEED
Adjustablewrench
Small,thin-bladeflat screwdriverwith approximately1/8"
bladewidth is neededto accessthe calibrationscrew.
PARTS INCLUDED
PART QUANTITY
Brassorifices 4
0
Stick-on conversion label 1
3O