GE PFSF6PKWABB Owner's Manual And Installation Instructions page 4

About the controls with temperaturesettings.
f
(Hold 3 _c
for Turbo Ft_e}
TURBO FREEZE TURBO COOL I '_'_'_T" I
L ht ON/OF_
IHo_ 3 _conds}
(Hold 3 _c
f_ Turbo ¢ooll
RESET FILTER CUBED CRUSHED WATER
}Hold 3 s_ }Hold 3 s_
to Reset Filter} to L_k Contrdl
NOTE: Therefrigerator is shipped with protective film covering the temperaturecontrols.
If this film was not removedduring installation, remove it now
The temperature controls are preset in the factory at 38°F for the refrigerator compartment
and -2°1: for the freezer compartment. Allow 24 hours for the temperature to stabilize to the
preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly from
the SET temperature based on usage and operating environment.
Changing the Temperature
Tochange the temperature, press and release the
ADJUST FREEZERor ADJUST REFRIGERATOR pad.
The display will show the actual temperature. To
change the temperature, tap either
the ADJUST
FREEZERor ADJUST REFRIGERATOR pad und! the
desired temperature is displayed.
Once the desired temperature has been set,
the temperature display will return to the actual
reflJgerator and fl'eezer teinperatures aiier ] 0
seconds. Several a(!iustment,s may be required.
Each time you a(!just controls, allow 24 horns ti)r the
reti_igerator to reach the temperature you have set.
4