GE PFSF6PKWABB Owner's Manual And Installation Instructions page 19

Installation Instructions
REPLACING THE FREEZER DOOR (cont.)
[] Hang the freezer door front onto open slots
on the sides.
© ©
[] -[]ghten screws completely. (There are four
10 mm hex-head bolts.)
[] REPLACE THE FREEZER BASKET
Replace the freezer basket by lowering it into
the frame.
REPLACING THE FREEZER DOOR (cont.)
[] REPLACE THE FREEZER BIN
Hookthe ends of the freezer bin into both
brackets, and push down until they lock
into place. (See page 8.)
[] CONNECTING THE REFRIGERATOR
TO THE HOUSE WATER LINE
(icemaker and dispenser models)
A cold water supply is required for automatic
icemaker operation. If there is not a cold water
supply, you will need to provide one. See
Installing the Water Line section.
NOTES:
* Before making the connection to the
refrigerator, be sure the refrigerator power cord
is not plugged into the wall outlet.
* If your refrigerator does not have a water filter,
we recommend installing one if your water
supply has sand or particles that could clog the
screen of the refrigerator's water valve. Install it
in the water line near the refrigerator. If using
GE SmartConnect
TM
Refrigerator Tubing Kit, you
will need an additional tube (WXO8XIO002) to
connect the filter. Do not cut plastic tube to
install filter.
[] If you are using copper tubing, place a
compression nut and ferrule (sleeve) onto
the end of the tubing coming from the
house cold water supply.
If you are using the GE SmartConnect
TM
tubing, the nuts are already assembled to
the tubing.