GE PFSF6PKWABB Owner's Manual And Installation Instructions page 23

Installation instructions
I_] LEVEL THE FREEZER DOOR
[] Locate the height adjuster in the freezer
door. Slightly loosen the four Phillips-
head screws from the door on each side
(right and left).
[] Loosen the controller screw with a
Phillips-head screwdriver to adjust the
level.
I_] LEVEL THE FREEZER DOOR (cont.)
[] Find the best position to align the door
slope.
//
Example: The slope is about
2 mm as shown below.
i
Rotate the height adjuster to +2.0
to reduce the door slope.
[] After adjustment, tighten all the screws.
[_ SET THE CONTROLS
Set the controls to the recommended
setting,
CONTROL SETTINGS I
[]
REMOVE PACKAGING
A) Remove all tape, foam and protective
packing from shelves and drawers.
The icemaker will not begin to operate
until it reaches its operating temperature
of 15°F (-9°C) or below. It will then begin
operation automatically. It will take 2-3
days to fill the ice bin.
23