Using The Surfaceunits - GE JMP31 Owner's Manual

Usingthe surface units.
Throughout this manual, features and appearance may vary from your model.
How to Set
OFF
LO; H[ Push the knob in and turn in either
... , direction to the setting )ou want.
At both OFFand HI the control clicks
into position. Y)m may hear slight
clicking
SOtlnds (hlIJng cooking,
indicating the control is keeping the
power level you set.
Be sure you turn the control knob
to OFFwhen you finish cooking.
A stmfi_ce unit ON indicator light xfill
glow when ally sm'li_ce refit is on.
Not over l'.
Surface Cookware tips
Use medimn- or hea\)'-weight cookware.
J_dtli//intllll cookware condtlcts heat filster
than other metals. Cast-iron and coated
cast-iI'on cookwai'e aI'e slow to
_lbsoi-b
heat, but generally cook evenly at low to
medium heat settings. Smel pans may
cook tmevenlv if not combined with
other metals.
For best cooking results, pans should be
flat on the bottom. Match the size of the
saucepan to the size of the surli_ce trait.
The pan should not extend over the
edge ot the sm_hce trait more than 1".
Use only flat-bottomed woks.
Wok Cooking
We recommendthat you use only a flat-bottomed
wok. Theyare available at your local retail store.
Do not rise woks that have support
tings. Use ot these D])es of woks, with
or without the ring in place, can be
d_l ngei'o//s.
Placing the ring over the stmfi_ce trait will
cause a build-up of heat that will damage
the porcelain cooktop. Do not try to use
such woks without the ring. You could be
seriously bm'ned if the wok tipped over:
Deep Fat Frying
Do not oxerfill cookware with fi_t that
may spill oxer when adding toed. Frost)
toods bubble xigorousl,x.
X_atch food flTing at high temperatm'es.
Keep range and hood clean fl'om grease.