GE JGP337 Owner's Manual And Installation Instructions page 18

Installation Instructions
PREPARING H
The following MINIMUM clearance
dimensions must be maintained.
13" MAX. Depth
of unprotected
6" MIN.
clearance from
_cutout to side
wall on the right
of the unit
30" MIN.
clearance from I
MIN.
countertop to I height from
unprotected I countertop to
overhead surface nearest cabinet on
either side of unit
3 3/4" MIN.
clearance from
cutout to side
wall on the left
o1 the unit
Overall cooktop dimensions
3
Cutout dimensions
of the countertop
To insure accuracy, it is best to make _'
a template when cutting the opening
in the counter.
2 1/4" Min/.
Between cutout
and the wall behind
the cooktop
2 1/2" Min.
from front edge
of cutout
and front edge
of countertop
5/8" width of cut
OPENING
The recommended Gas Supply
Location from the backwall.
Recommended
gas supply
location.
1" Min, From Backwall
-<_ 13 1/4!_
From Cutout
J
Center Line
Make sure the wall coverings,
countertop and cabinets around the
cooktop can withstand heat (up to
200°F) generated by cooktop.
18