GE JGP337 Owner's Manual And Installation Instructions page 12

Cleaningthe glass cooktop.(o0 some models)
Cleanyourcooktopafter
each spill Use CERAMA
BRYTE ® Ceramic Cooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CEIL_d¥IA BRYTE _'Ceramic
Cooktop Cleaner on the glass cooktop.
Other creams may not be as eflecfi',e.
To maintain and protect the smtilce el
yore" glass cooktop, tollow these steps:
[] Betore using the cooktop lot the
fi_t time, remo_e the burner grates
and clean it with CER_dMA BRYTE ')
Ceramic (_ooktop Cleane_: This
helps protect the top and makes
clemmp easier:
[] Daily use of CEIL_d_g__BRYTE <_'
Ceramic Cooktop Cleaner will hel I)
kee I) the cooktop looking new.
[] Shake the cleaning cream well.
Apply a t0w drops Of CEIL_/IA
BRYTE <': C eramic Cooktop Cleaner
directly to the cooktop.
[] Use a paper towel or CEIL_dVIA
BRYTE <_> Cleaning Pad tot Ceramic
Cooktoi)s to clean the entire
cooktop SUI]il ce.
[] Use a dr) cloth or paper towel
to remo',e all cleaning residue.
No need to rinse.
NOTE:It is very i?nportant t hat youDONOT
heat thecooktopuntil it hasbeencleaned
thoroughly
IMPORTANT" D onot lift the cooktop.Lifting
thecooktopcan lead to damageand improper
operationof the cooktop.
UseaCERAMA BRYTE _ Cleaning
PadforCeramicCooktops.
Burned-On Residue
WARNING: DAMAGE to your glass surface
may occur if you use scrub pads other than
those recommende_
[] Allow the cooktop to cool.
[] Remo',e the burner grates and
spread a few drops of CEIL_d_4A
BRYTE _> Ceramic Cooktop Cleaner
on the entire bm'ned residue area.
[]
Using the included CEIL_IA
BRYTE <_> Cleaning Pad fi)r Ceramic
Cooktops, mb the residue area,
ali))lying, , pressm'e as needed.
[]
[]
If any residue remains, repeat the
steps listed above as needed.
For additional protection, atter
all residue has been remo',ed,
polish the entire surtace with
CEI_d¥1A BRYTE : Ceramic
Cooktop Cleaner and a paper towel.
The CERAMA BRYTE _ Ceramic
Cooktop Scraper and all
recommended suppfies are
available through our Parts Cente_
See instructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
12
Heavy, Burned-On Residue
[] Allow the cooktop to cool.
[] Use the CERAMA BRYTE <_'
Ceramic (_ooktop Scraper at
approximately a 45 ° angle against
the glass surfilce and scrape the
soil, It will be necessary to apply
I)I'eSStlI'e 10
the
I'_lZOI" SCI'_lI)eI" in
order to remove the residue.
[] After scra )in(* with the
' I &
CERAMA BRYTE <_' C eramic
Cooktop Scraper, spread a few
drops of (;EI_d_<IA BRYTE <':
Ceramic Cooktop Cleaner on the
entire burned residue area. Lrse the
CEI_d_<IA BRYTE _>Cleaning Pad to
remove any remaining residue.
[]
For additional protection,
after all residue has been
removed, polish the entire
sm'iace with CEIL_dMA BRYTE ')
Ceramic Cooktop Cleaner
and a paper towel.