GE JGP337 Owner's Manual And Installation Instructions page 17

Installation Instructions
Pre-lnstallation Checklist
[_ Remove packaging materials, literature
package and the conversion kit from the
cooktop before beginning installation.
Literature Package
Styrofoam
_
Packaging
Cooktop f
Remove packaging tape. To assure
no damage is done to the finish of the
product, the safest way to remove the
adhesive left from packaging tape on
new appliances is an application of
a household liquid dishwashing
detergent, mineral oil or cooking oil.
Apply with a soft cloth and allow to
soak. Wipe dry and then apply an
appliance polish to thoroughly clean
and protect the surface.
NOTE: The plastic tape must be
removed from all chrome trim. It
cannot be removed if it is baked on.
Be sure to place all literature and
the conversion kit in a safe place
for future use.
Make sure you have all the tools and
materials you need before starting the
installation of the cooktop.
When preparing cooktop opening,
make sure the inside of the cabinet
and the cooktop do not interfere with
each other. (See section on preparing
the opening.)
Your home must provide the adequate
electrical service needed to safely and
properly use your cooktop. (Refer to
section on electrical requirements.)
When installing your cooktop in your
home, make sure all local codes and
ordinances are followed exactly as
stated.
Make sure the wall coverings,
countertop and cabinets around the
cooktop can withstand heat (up to
200°F) generated by the cooktop.
17