Basic Operations - Aiwa CX-NA50 Operating Instructions Manual

BASIC OPERATIONS
_AEJEC T --
Deck1
REV MODE
• On deck 1, tapes are always played back on both sides,
On deck 2, you can select a reverse mode to play back one or
both sides.
• Use Type ] (normal), Type l[ (high/Cr02) or Type IV (metal)
tapes for playback.
1 Press the TAPE button and press the _A EJECT
mark to open the cassette holder.
Insert a tape with the exposed side down. Push the cassette
holder to close.
2 Press the <11_ button to start play.
The tape counter indicates
the tape running length.
tt t ; _t J
i_..t L!
Playback side indicator
When tapes are loaded In both decks
Press the TAPE button first to select a deck.
The selected deck number is displayed.
To stop play, press the • button.
To pause play (deck 2 only), press the II button. To resume
play, press again.
To change the playback side, press the <i_ DIRECTION/
PRESET button in play or pause mode.
To fast forward or rewind, press the <1<1or _ button. Then
press the • button to stop the tape.
To start play when the power is off (Direct Play Function)
Press the TAPE button The power is turned on and play of the
inserted tape begins.
To set the tape counter to O000
Press the • CLEAR button in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
MUSIC SENSOR
If there is a 4-second or longer blank between each track, a
search for the beginning of the current or next track during
playback can be done easily.
Press the _ or _ button during playback referring to the
playback side indicator (4 or I=.-)on the display.
For example, when the I_ button is pressed while I_ is
displayed, playback of the next track starts.
Music sensor function may not be able to detect tracks under
the following conditions:
• Blanks of less than 4 seconds between tracks
• Noisy blanks
• Long passages of low-end sound
• Low overall recording levels
I_: The front side is being played (forward).
4: The back side is being played (reverse).
To select a reverse mode (deck 2 only)
Each time the REV MODE button is pressed, the reverse mode
changes.
,J € Wh'L'UI
%!
To play one side only, select .C.
To play from front side to reverse side once only, select _'T).
TO play both sides repeatedly, select (C).
• When tapes are loaded in both decks, C) on the display
indicates Continuous Play