Aiwa CX-NA50 Operating Instructions Manual page 5

2 Connect the surround speakers to the main unit.
(only for NSX-A54)
There are no differences between the surround speakers,
Connect each surround speaker cord to the SURROUND
SPEAKERS R or L terminal,
0
3 Connect the supplied antennas.
Connect the FM antenna to the FM 75 _ terminals and the
AM antenna to the AM LOOP terminals.
AM LOOP antenna
FM antenna
POSITIONING THE SPEAKERS (NSX-A54
only)
Positionthe speakers to make the most of the SURROUND effect.
Standard positioning
_x_ _
NA50
(((E
}
Front speaker (Right)
Front speaker (Left)
Surround speakers
Place the surround speakers behind the listening area.
To mount the surround speakers on the wall
Mount each speaker on a soot that can hold its weiaht.
4 Connect the AC cord to an AC outlet.
To position the antennas
FM feeder antenna:
Extend this antenna horizontally in a T-shape and fix its ends to
the wall,
AM loop antenna:
Position for the best reception.
To stand the AM antenna on a surface
Fix the claw to the slot.
Sound is not heard from the surround speakers when the
SURROUND is set to off.
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to the FM 75 _ terminals.
75 b
• Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in the SPEAKERS
terminals.
• Do not leave objects generating magnetism near the speakers
as these object may be damaged.
• Do not bring the FM antenna near metal objects or curtain rails.
To connect other optional equipment _ page 21. ]