Dubbing A Tape Manually; Dubbing Thewhole Tape - Aiwa CX-NA50 Operating Instructions Manual

DUBBING A TAPE MANUALLY DUBBING THEWHOLE TAPE
1_3--
R2
• Set the tape to the point where recording will start.
• The reverse mode is automatically set to _..
Note that recording will be done on one side of the tape only.
1 Press the TAPE button.
2 Insert the original tape into deck 1 and the tape
to be recorded on into deck 2,
Insertthetapeswiththe sidesto be playedbackor recorded
on facingoutfromthe unit,
3 Press the TAPE/DECK 1/2 button to select
deck 1.
"TP 1"is displayed,
4 Press the • REC/REC MUTE button to start
recording.
PJaying and recording startsimultaneously,
To stop dubbing
Press the • button,
This function allows you to make exact copies of both sides of
the original tape. The reverse side of both tapes will start
simultaneously as soon as the longer tape has been reversed.
• Dubbing does not start from a point halfway in the tape,
• The reverse mode is automatically set to .T.).
1
2
3
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Inserteach tapewiththe sideto be playedbackor recorded
on first facing out from the unit.
Press the SYNCHRO DUBBING button once or
twice to start recording,
For recording at normal speed, press it once to display
NORM-DUB.
For recording at high speed, press it twice to display
HIGH-DUB.
=1
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press the • button.
Recording does not start, if the erasure prevention tab on either
side of the tape is broken off.