Setting Specific Patch Parameters - Zoom G3 Operation Manual

Setting specific patch parameters

1
To activate the TOTAL menu
• Press .
PATCH
2
To adjust the patch level
• Turn of the left effect.
3
To change the order of the effects
• Turn , and of the middle effect to exchange effect locations.
14
CHAIN/NAME CTRL PDL/CTRL SW
NOTE
• The setting range is 0-120.
HINT
• To change the overall volume of all patches, adjust the master level
(see page 18).
NOTE
• Settings made for total
p a r a m e t e r s a r e s ave d
separately for each patch.