Security Menu - TYAN S7025 User Manual

3.10 - Security Menu

The system can be configured so that all users must enter a password
every time the system boots or when BIOS Setup is entered, using either
the Supervisor password or User password. The Supervisor and User
passwords activate two different levels of password security. If you select
password support, you are prompted for a one to six character password.
Type the password on the keyboard. The password does not appear on
the screen when typed. Make sure you write it down. If you forget it, you
must clear CMOS and reconfigure.
Security Settings
Supervisor Password : Not Installed
User Password
Change Supervisor Password
Change User Password
Boot Sector Virus Protection
Feature
Security Settings
Supervisor Password
User Password
Change Supervisor
Password
Change User Password
Boot Sector Virus
Protection
BIOS Setup Utility
: Not Installed
[Disabled]
Option
Not Installed
Installed
Not Installed
Installed
__
__
Disabled
Enabled
65
http://www.tyan.com
Security
Install or change the
password.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
If the password has been set,
Installed displays. If no
password is set, Not Installed
displays.
If the password has been set,
Installed displays. If no
password is set, Not Installed
displays.
Selects this option to change
or install Supervisor Password.
Selects this option to change
or install User Password.
When it is set to [Enabled],
BIOS will issue a virus warning
message and beep if a write to
the boot sector or the partition
table of the HDD is attempted.