TYAN S7025 User Manual page 67

Feature
CPU Bridge Chipset Configuration
QPI Frequency
QPI L0s and L1
Memory
Frequency
Memory Mode
Demand
Scrubbing
Patrol Scrubbing
Throttling-Closed
Loop
Hyster temp
Guardband temp
Inlet temp
Temp Rise
Air Flow
Altitude
Option
Auto
4.800GT
5.866GT
6.400GT
Disabled
Enabled
Auto
Force DDR-800
Force DDR-1066
Force DDR-1333
Independent
Channel Mirroring
Lockstep
Sparing
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
1.5°C
3°C
6°C
/
/
/
/
Sea Level or
Below
1~300
301~600
601~900
901~1200
1201~1500
1501~1800
1801~2100
2101~2400
2401~2700
2701~3000
67
http://www.tyan.com
Description
Transition the links to the specified
speed when transitioning the links to
full-speed.(if supported by all
components)
Enable/Disable L0s and L1.
Forces a DDR3 frequency slower
than the common tCk
detected via SPD.
Independent: Independent channel.
Mirroring: Mirrors channel space
between channels.
Lockstep: lockstep between channel
0 and 1.
Spare: Sparing mode.
ECC Demand scrub enable/disable
ECC patrol scrub enable/disable
BIOS to program Closed Loop
throttling for memory compents.
Temperature Hysteresis.
Temperature guardband to apply to
DIMM temp sensor Threshold. (in
0.5°C units)
Temperature at the chassis inlet. (in
0.5°C units)
Temperature rise to the DIMM
thermal zone. (in 0.5°C units)
Air speed to the DIMMs. (in units of
mm/sec)
The system altitude above sea
level(in meters)