Bios Security Menu - TYAN Thunder K8SR User Manual

Feature Option
Enabled
Quick Boot Mode
Disabled
Disabled
Quiet Boot
Enabled
Force BIOS
Quick Boot Add On ROM
Display Mode
Keep Current
On
Boot up Number-Lock
Off
Enabled
PS/2 Mouse Support
Disabled
Fast
Typematic Rate
Slow
Presen
System Keyboard
Not-Present
Disabled
Parity Check
Enabled
No
Boot To OS/2
Yes
Enabled
Wait for "F1" If Error
Disabled
Enabled
Hit "Del" Message
Display
Disabled
Disabled
Interrupt 19 Capture
Enabled
WWW.TYAN.COM
Description
This option allows user bypass
BIOS self test during POST
Enable this option to hide BIOS
Post messages during POST
Allows user to force BIOS/Option
ROM of add on cards to be
displayed during quiet boot
Choose status of keyboard NUM
LOCK key
Allows user to choose status of
PS/2 mouse support
Choose the speed at which keys
are repeated
Allows user to disable all system
keyboards
Enables system parity check
Set this option to yes only if
booting to OS/2
Allows user to disable the "Press
F1 to Continue" error message
when error is detected
Allows user to disable the "Press
DEL to enter setup" message
during POST
Allows devices (such as network
card) to capture INT19 for
booting
45
3.05 – BIOS Security Menu
The system can be configured so that all users must enter a password every
time the system boots or when BIOS Setup is entered, using either the
Supervisor password or User password. The Supervisor and User passwords
activate two different levels of password security. If you select password support,
you are prompted for a one to six character password. Type the password on the
keyboard. The password does not appear on the screen when typed. Make sure
you write it down. If you forget it, you must clear CMOS and reconfigure.
BIOS Setup Utility
Main Advanced PCI/PnP Boot
Exit
Security Setting
Supervisor Password:
User Password:
Change Supervisor Password
Change User Password
Clear User Password
Boot Sector Virus Protection
Feature Option
Supervisor Password:
Not Installed
Installed
Not Installed
User Password:
Installed
Change Supervisor
Password
Change User Password
Clear User Password
WWW.TYAN.COM
Security Chipset Power
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
Use [+] or [-] to
configure system
time.
+/- Change Field
[Disabled]
Tab Select Field
F1 Help
F10 Save and Exit
ESC Exit
Description
If the password has been set,
Installed displays. If no
password is set, Not Installed
displays.
If the password has been set,
Installed displays. If no
password is set, Not Installed
displays.
Select this option to change
Supervisor Password
Select this option to change
User Password
Select this option to clear User
Password
46