3.7.2 - IDE Configuration Sub-Menu
You can use this screen to select options for the IDE Configuration Settings.
Use the up and down <Arrow> Keys to select an item. Use the <Plus> and
<Minus> Keys to change the value of the selection options.
Advanced
IDE Configuration
SATA Configuration
Configure SATA as
Primary IDE Master
Secondary IDE Master
Third IDE Master
Third IDE Slave
Fourth IDE Master
Fourth IDE Slave
Hard Disk Write Protect
IDE Detect Time Out (Sec)
Feature
IDE Configuration
SATA Configuration
Configure SATA as
Hard Disk Write
Protect
IDE Detect Time
Out (Sec)
BIOS Setup Utility
[Enhanced]
[IDE]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Disabled]
[35]
Option
Enhanced
Configure SATA devices
Disabled
Compatible
IDE
Select legacy IDE, RAID or AHCI as the
RAID
SATA interface.
AHCI
Enable/Disable device write protection.
Disabled
This will be effective only if device is
Enabled
accessed through BIOS.
Select the time out value for detecting
0~35
(at 5 interval)
ATA/ATAPI device(s).
44
http://www.tyan.com
Options
Disabled
Compatible
Enhanced
← → Select Screen
↑↓ Select Item
+/-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
Description