Troubleshooting; Specifications - Sharp Plasmacluster FP-A28C Operation Manual

TROUBLESHOOTING

Before calling for repair, please review the list below, since the problem may not be a unit malfunction .
SYMPTOM
Dust and smoke are not removed.
A clicking or ticking sound is heard
from the unit.
The discharged air has an odor.

SPECIFICATIONS

Power supply
Fan
Speed
Operation
Recommended Room Size
CADR(Dust / Smoke / Pollen)
Filter type
Cord Length
Dimensions
Weight
*1 Size of a room which is appropriate for operating the unit at maximum fan speed
Standby Power
Operation_FP-A28U_EN+FR+ES.indb 13
Fan Speed Adjustment
Rated Power (W)
Fan Speed (CFM)
*1
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 0.3W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
E-13
REMEDY (not a malfunction)
• Clean or replace the HEPA filter if they appear to be
heavily soiled. (Refer to E-11, E-12 )
• Clicking or ticking sound may be audible when the unit
is generating ions.
• Check to see if the HEPA filter are heavily soiled.
• Plasmacluster Air Purifiers may produce a slight odor.
This is normal and is a result of the Plasmacluster Ions
refreshing the air.
120V
MAX
45
99
120sq.ft(11.1m
91 / 77 / 100
HEPA Filter
6.5ft (2.0m)
385mm(W) x 128mm(D) x 380mm(H)
15 / in(W) x 5 in(D) x 14
1
8
8.2Ibs (3.7kg)
60Hz
MED LOW
26 10
64 28
2 )
/ in(H)
7
8
5/23/11 10:50:15 AM