Jeep Automobile Owner's Manual page 85

Help Command
If you need assistance at any prompt, or if you want to
know your options at any prompt, say Help following
the beep. The UConnect™ system will play all the
options at any prompt if you ask for help.
To activate the UConnect™ system from idle, simply
press the "Phone" button and follow audible prompts for
directions. All UConnect™ system sessions begin with a
press of the "Phone" button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say Cancel and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) UConnect™ System to a Cellular Phone
To begin using your UConnect™ system, you must pair
your compatible Bluetooth™ enabled cellular phone.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85
To complete the pairing process, you will need to refer-
ence your cellular phone owner's manual. The UCon-
nect™ website may also provide detailed instructions for
pairing.
The following are general phone to UConnect™ System
pairing instructions:
• Press the "Phone" button to begin.
• After the Ready prompt and the following beep, say
Setup Phone Pairing.
• When prompted, after the beep, say Pair a Phone and
follow the audible prompts.
• You will be asked to say a four-digit pin number,
which you will later need to enter into your cellular.
You can enter any four-digit pin number. You will not
need to remember this pin number after the initial
pairing process.
3