Using The Panic Alarm; To Turn Off "Flash Lights With Lock - Jeep Automobile Owner's Manual

2. While the LOCK button is pressed (after four seconds),
press the PANIC button. Release both buttons.
The "Sound Horn On Lock" feature can be reactivated by
repeating this procedure.

Using The Panic Alarm

To turn the panic alarm feature ON or OFF, press and
hold the PANIC button on the key fob for at least one
second and release. When the panic alarm is activated,
the headlights and park lights will flash, the horn will
pulse on and off and the interior lights will turn on.
The panic alarm will stay on for three minutes unless you
turn it off by pressing the PANIC button a second time, or
if the vehicle speed is 5 mph (8 km/h) or greater.
NOTE: When you turn off the panic alarm by pressing
the PANIC button a second time, you may have to be
closer to the vehicle due to the radio frequency noises of
the system.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21

To Turn Off "Flash Lights With Lock"

NOTE: The "Flash Lights With Lock" feature can be
turned on or off using the following steps:
1. Press the UNLOCK button for 4 to 10 seconds.
2. While the UNLOCK button is pressed, (after four
seconds) press the LOCK button. Release both buttons.
3. Test the "Flash Lights With Lock" feature outside of
the vehicle, by pressing the LOCK button with the
ignition in the LOCK position, and the key removed.
NOTE: Pressing the LOCK button, while you are in the
vehicle, will activate the Security Alarm. Opening a door
with the Security Alarm activated will cause the alarm to
sound. Press the UNLOCK button to deactivate the
Security Alarm.
The "Flash Lights With Lock" feature can be reactivated
by repeating this procedure.
2