Jeep Compass Owner's Manual page 31

5. Repeat these steps if you want to return this feature to
its previous setting.
NOTE:
If you do not hear the chime it means that the system
did not enter the programming mode and you will
need to repeat the procedure.
Use the Automatic Unlock Doors On Exit feature in
accordance with local laws.
Automatic Unlock Doors on Exit
The doors will unlock automatically if:
1. The Automatic Unlock Doors On Exit feature is en-
abled.
2. The transmission was in gear and the vehicle speed
returned to 0 mph (0 km/h).
3. The transmission is in NEUTRAL or PARK.
4. The driver's door is opened.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29
5. The doors were not previously unlocked.
The Auto Unlock feature can be enabled or disabled.
Refer to "Personal Settings (Customer-Programmable
Features)" under "Electronic Vehicle Information Center
(EVIC) — If Equipped" in Section 4.
For vehicles not equipped with the EVIC, the Auto
Unlock Feature can be enabled or disabled by performing
the following procedure:
1. Close all doors and place the key in the ignition.
2. Cycle the ignition switch between LOCK and ON and
back to LOCK four times, ending up in the LOCK
position.
3. Depress the power door UNLOCK switch to unlock
the doors.
4. A single chime will indicate the completion of the
programming.
2